TX 4x4
Written quote Get a quote

Ford Bronco Lift Kit

A suspension lift kit for the Ford Bronco that clears 35s, with the geometry and track-bar work a coil-sprung IFS 4x4 with a solid rear axle needs to stay stable.

A front strut spacer and leveling kit hardware laid out on a bright installation bay floor

Ford Bronco Lift Kit at a glance

Two-inch Bronco lift with spacers and shocks
$1,300–$2,200
Two-and-a-half to three-inch Bronco suspension lift
$2,000–$3,200
Bronco lift with upper arms and track bar
$2,700–$4,100
Four-wheel alignment after the lift
$95–$190

Ford Bronco lift kit that respects the track bar

The Bronco mixes an independent coil-over front with a solid, coil-sprung rear on a track bar, and a tall lift tugs at both ends. Raising the Bronco front past about two inches runs the upper arms out of camber range, and raising the rear swings the axle off-center on its track bar. A proper Bronco kit addresses the front arms and the rear track together so the 4x4 still drives straight.

  • Two to three inches with the front arms corrected
  • Rear track-bar bracket to keep the axle centered
  • Coil-over and coil springs matched to the added height
A front strut spacer and leveling kit hardware laid out on a bright installation bay floor

Ford Bronco lift kit fitment

A Bronco's starting height depends on the package, and a Sasquatch already rides on longer coil-overs, so the net lift a kit delivers differs from a base truck. We confirm the model year, body and package before choosing springs and arms.

  • Sixth-generation Bronco from 2021
  • Lift of 2 to 3.5 inches depending on the starting package
  • Two-door and four-door bodies
  • Badlands, Wildtrak and Sasquatch included

What the Ford Bronco lift kit includes

On a Bronco the front arms and the rear track bar are what make or break the job, so the parts list leads with geometry rather than raw height.

  • Front coil-over spacers or taller front coil-overs
  • Rear coil spring spacers for the solid axle
  • Longer shocks tuned to the Bronco's travel
  • Upper control arms that restore camber range
  • An adjustable or bracket-mounted track bar for the rear
  • Brake-line brackets, bump stops and a torque sheet

How we install a Ford Bronco lift kit

The Bronco lift follows a fixed order so the independent front and the solid rear come back into geometry together.

  1. 1. Confirm the Bronco year, body and package.

  2. 2. Measure the ride height and inspect the coils and arms.

  3. 3. Install the front lift and the corrected upper arms.

  4. 4. Fit the rear coils and the track-bar correction.

  5. 5. Set the longer shocks and check the brake lines.

  6. 6. Align camber, caster, toe and thrust.

  7. 7. Road-test, verify the rear track and re-torque.

What a Ford Bronco lift kit costs

A Bronco lift is the springs and shocks at both ends plus the arms and track-bar parts the height demands, and it rises with the system chosen. Figures differ by package and year, so read them as ranges and let us quote your Bronco. Costs vary by year and trim.

Two-inch Bronco lift with spacers and shocks
$1,300–$2,200 installed
Two-and-a-half to three-inch Bronco suspension lift
$2,000–$3,200
Bronco lift with upper arms and track bar
$2,700–$4,100
Four-wheel alignment after the lift
$95–$190
Rear coil and shock upgrade for a loaded Bronco
$500–$1,000

What a lifted Bronco needs underneath

A Bronco with a tall lift and no geometric correction shimmies and drags a rear tire, because the arms lose camber and the track bar swings the axle sideways. The corrected arms and an adjustable track bar put the front and rear back where they belong, so a lifted Bronco still tracks straight at highway speed rather than hunting the lane.

  • Front camber held so the Bronco can align
  • Rear axle kept centered under the body
  • A 4x4 that stays stable at highway speed

From the bay

Questions about this build

How much can you lift a Bronco?

Two to three inches is the honest range on a Bronco, because the front coil-over still has travel and the rear stays reasonable on its track bar. Past three the arms and the track need correcting, which we price into the job.

Do I need a new track bar on a lifted Bronco?

The rear bar needs to be adjustable or bracket-corrected, because lifting swings the solid axle sideways and off-center. We reset the track so a lifted Bronco does not drag one rear tire or feel unsettled in a corner.

What tires fit a lifted Bronco?

A two-to-three-inch lift usually fits a 35 on a Bronco with the right offset, and a Sasquatch already clears a 35 stock. We check wheel offset and fender clearance on your truck so the tire you want actually fits.

Will a lifted Bronco ride rough?

It can if the shocks are wrong for the truck. We valve the shocks for the Bronco's weight and use quality coils so the 4x4 stays planted on pavement as well as loose ground, which is the balance that matters.

Can you lift a two-door Bronco?

Yes. The two-door and four-door share the suspension, so the kit is the same idea, though the shorter truck feels the change a little more. Tell us the body and the package and we order right.

Does lifting a Bronco affect the warranty?

A suspension lift can affect a warranty claim on the parts it touches, but a reversible bolt-on with the stock parts kept helps a lot. We explain exactly what is involved before we start.

Why Valley drivers bring their trucks here

  • Lift, leveling, wheels and alignment under one roof, corrected and aligned.
  • Written estimate before any part is ordered, with the extras called out.
  • Fitment confirmed on your exact truck before you buy tires or wheels.
  • Road-tested and re-torqued, with a settling check after the first miles.

Request a quote

Tell us your truck and what you want. We reply with a written quote for the build.