TX 4x4
Written quote Get a quote

TX 4x4 — Lift Kits, Wheels and Alignment Across the Rio Grande Valley

We lift trucks and SUVs the right way: matched kits, corrected steering geometry, proper fitment and an alignment that always follows. From a leveling kit for a daily driver to a full suspension lift and a wheel-and-tire package, every job is built for your year, make and trim and road-tested before you get the keys.

The lifted suspension and all-terrain tire of a pickup on a bright, clean installation bay floor

What we install

Five service lines cover the lift, suspension and wheel work Valley drivers ask for, and each one starts with your truck rather than a shelf kit. We confirm fitment, correct the geometry a lift disturbs and align the truck before it leaves, so it looks right and drives right.

  • A pickup truck with a front leveling kit installed, sitting level on a bright installation bay floor

    Leveling Kits

    Front leveling kits that sit a truck even, clear a taller tire and keep the factory ride — installed with the alignment and shock work the job really needs across the Rio Grande Valley. We size every kit to the truck and the tire. We check the rake too.

    $250–$550 varies by year, make and trim

  • A pickup truck raised on a two-post lift while a suspension lift kit is being installed in a bright bay

    Lift Kits

    Complete lift kits for trucks and SUVs across the Rio Grande Valley — matched springs, shocks and hardware installed with the alignment and geometry correction a real lift demands. We match the kit to the truck. We torque to spec.

    $450–$1,100 varies by year, make and trim

  • A coil-over shock and control-arm suspension components arranged on a bright, clean workbench

    Suspension

    Suspension upgrades and repairs for trucks and SUVs across the Rio Grande Valley — springs, shocks, control arms and steering parts installed or replaced to restore ride, control and load capacity.

    $220–$520 varies by year, make and trim

  • Alignment target paddles on the wheels of a pickup on a bright alignment rack

    Wheel Alignment

    Four-wheel alignments for trucks, 4x4s and SUVs across the Rio Grande Valley — camber, caster, toe and thrust angle set to spec so tires last and the truck tracks straight. We measure before we adjust. We set all four corners to spec. We road-test the truck before handoff.

    $70–$120 varies by year, make and trim

  • A new alloy wheel and all-terrain tire mounted and torque-checked on a bright installation bay floor

    Wheels and Tires

    Wheels and tires sized and mounted for how a truck is used — the right bolt pattern, offset and load rating, balanced and road-force tested across the Rio Grande Valley.

    $160–$320 varies by year, make and trim

How a job works

The same four steps run whether you want a leveling kit or a full lift and wheel package. Nothing is ordered and no part is fitted until we have confirmed your truck and you have approved a written estimate.

  1. Confirm

    We check your year, make and trim and settle the height, tire size and fitment before quoting.

  2. Quote

    You get a written estimate with parts, labor and alignment as separate lines, and work starts only once you approve it.

  3. Install

    We install the kit or the wheel set, correct the geometry and torque every fastener to spec.

  4. Align and test

    We align the truck, road-test it and re-check the torque before handing back the keys.

Built for how Valley trucks actually get used

Trucks that work, not garage queens

Most rigs we see tow a trailer, run ranch lanes or carry tools every week. We set the lift and the wheel package up for that workload, then explain what will hold up under it instead of what only looks good parked.

Geometry corrected, not just raised

A lift that only adds height leaves the steering wandering and the tires scrubbing. We correct camber, caster and thrust angle and align the truck, so the taller stance still tracks straight down the expressway.

Fitment checked on the real truck

Wheel offset, tire size and clearance are confirmed on your truck at full lock before anything is ordered, so a set that looks right on a chart does not rub a fender the first time you take a turn.

Matched for Valley conditions

Caliche dust, Gulf humidity and a long warm season break parts that last longer elsewhere. We choose hardware, shocks and coatings with those conditions in mind and point out the failure we expect next.

Why drivers bring their trucks to TX 4x4

  • Lift, leveling, wheels and alignment under one roof, corrected and aligned.
  • Written estimate before any part is ordered, with the extras called out.
  • Fitment confirmed on your exact truck before you buy tires or wheels.
  • Road-tested and re-torqued, with a settling check after the first miles.

What customers tell us

We do not print invented names or a bought star average. This is the feedback we hear most often, and every note a customer sends is read and answered before it goes anywhere.

  • The written estimate is the part customers mention first, because the price is settled before any part is ordered.
  • Being told plainly what a truck does not need yet is what people say keeps them coming back instead of shopping around.
  • Repeat and referral work is how we know a lift or a wheel set held up, since most new business starts with a recommendation.
  • Trucks that were corrected rather than merely raised are the ones owners say still feel planted at highway speed.

Cost and how-to guides

Plain answers on what lifts, leveling kits, wheels and alignments cost, written for Valley trucks and framed as real ranges instead of guesswork. Start with a guide when you are still deciding where to spend.

  • Leveling Kit Cost

    A leveling kit across the Rio Grande Valley commonly runs from about $250 to $550 installed for a basic front spacer kit, $550 to $1,000 if you add matched front shocks, and $450 to $800 for leveling with a four-wheel alignment.

  • Lift Kit Cost

    A lift kit in the Rio Grande Valley commonly runs from about $450 to $1,100 installed for a modest level-style spacer lift, $1,200 to $2,400 for a 2.5 to 3-inch suspension lift, and $2,400 to $4,200 for a 4-inch suspension package with steering correction.

  • Wheel Alignment Cost

    A wheel alignment in the Rio Grande Valley commonly runs from about $70 to $120 for a front-only toe set and $110 to $200 for a four-wheel alignment.

  • Wheels and Tires Cost

    Wheels and tires in the Rio Grande Valley commonly run from about $120 to $260 to mount and balance a set of four, with all-terrain tires priced around $180 to $380 each and aftermarket wheels around $150 to $500 each.

Questions from the shop

Do I need a lift kit or just a leveling kit?

If you want the front even with the rear and a slightly taller tire, leveling is usually enough. If you want real clearance and bigger tires all around, a lift kit is the honest answer, and we will say so.

Will you align the truck after lifting it?

Every lift and every leveling install ends with a four-wheel alignment. Raising the truck changes the angles, so an alignment is what keeps the tires wearing evenly and the steering straight.

Can you fit wheels and tires without rubbing?

Yes, when the offset and tire size are checked against your truck first. We confirm clearance at full lock before anything is ordered, so you know the set fits before you pay.

What will my job cost?

We confirm the kit and the truck first, then hand you a written estimate with the parts, the labor and the alignment as separate lines. Nothing is ordered until you approve it.