Ford Bronco Leveling Kit
A front leveling kit for the Ford Bronco that evens the stance of the IFS 4x4, clears a taller front tire and keeps the solid rear axle and its coil springs exactly as Ford built them.
Ford Bronco Leveling Kit at a glance
- Front spacer leveling kit for the Bronco
- $340–$700
- Leveling kit with front coil-overs
- $750–$1,350
- Coil-over package for the Bronco
- $1,200–$2,000
- Four-wheel alignment after the leveling
- $95–$190
Ford Bronco leveling kit for an IFS 4x4 that sits level
The Bronco returned in 2021 on a body-on-frame chassis with an independent front suspension on coil-overs and a solid rear axle on coils. Like most trucks it carries a nose-down rake, and a leveling kit fixes that by raising only the front so the SUV sits even, a 33 clears the front fender and the rear axle, springs and track bar stay as Ford set them.
- Front-only lift that levels the Bronco stance
- Room for a 33 up front on the stock or near-stock wheel
- Solid rear axle, coils and track bar left untouched
Ford Bronco leveling kit fitment
Bronco front suspension varies by package: a base truck, a Sasquatch and a Badlands all sit at different heights, and the coil-over length differs between them. We confirm the year, the two- or four-door body and the package so the spacer suits the truck in front of us.
- Sixth-generation Bronco from its 2021 launch
- Height range of 1 to 2.5 inches at the front
- Two-door and four-door bodies
- Base, Big Bend, Black Diamond, Badlands, Wildtrak and Sasquatch packages
What the Ford Bronco leveling kit includes
A Bronco leans on its coil-overs and its track bar, so leveling is about the front and the alignment, not the rear axle. We correct the caster and camber the taller front moves and leave the solid rear axle where it is.
- Front coil-over spacers machined for the Bronco top mount
- Optional front coil-overs sized to the added height
- Caster and camber correction for the raised IFS
- Four-wheel alignment to reset toe and thrust
- Track-bar and drag-link clearance checks
- Road test for wander, rub and a centered wheel
How we level a Ford Bronco
The Bronco goes through the same steps each time, so the independent front and the solid rear stay in geometry together.
-
1. Confirm the Bronco year, body and package.
-
2. Record the ride height and check the front coil-overs.
-
3. Fit the front spacers and torque to Bronco specification.
-
4. Correct camber and caster on the raised front.
-
5. Set toe and thrust with the Bronco on the rack.
-
6. Check track-bar and tire clearance at full articulation.
-
7. Drive it, center the wheel and note the final figures.
What a Ford Bronco leveling kit costs
Leveling a Bronco costs less than a full suspension swap and changes the stance without touching the rear axle. Because packages and model years differ, treat every figure here as a range and let us price your Bronco. Pricing varies by year and trim.
- Front spacer leveling kit for the Bronco
- $340–$700 installed
- Leveling kit with front coil-overs
- $750–$1,350
- Coil-over package for the Bronco
- $1,200–$2,000
- Four-wheel alignment after the leveling
- $95–$190
- Rear coil spacer to fine-tune the Bronco
- $220–$520
Why a Bronco owner levels
The Bronco is bought to go off pavement, but most spend their week on the highway, so owners want the stance fixed without ruining road manners. Leveling clears the front tire, kills the rake and keeps the rear axle and its track bar exactly where Ford put them, which means the Bronco still tracks straight at speed.
- The solid rear axle and track bar stay put
- Front clearance for a 33 on the stock wheel
- A reversible change for a truck still under warranty
From the bay
Questions about this build
Will a leveling kit fit a Sasquatch Bronco?
It can, but a Sasquatch already sits higher and carries longer coil-overs, so the added height is smaller. We measure the truck first and tell you honestly how much, if anything, a leveled Sasquatch still gains.
Does leveling a Bronco affect the track bar?
No, because a front-only kit does not move the rear axle, so the track bar stays in geometry. If you later lift the rear, the bar needs a correction bracket, and we note that for you up front.
How much front lift does a Bronco need for 33s?
Around an inch and a half to two clears a 33 on a Bronco with the stock wheel, depending on the package. We check the fender and the crash-bar clearance on your truck before promising the fit.
Can you level a two-door Bronco?
Yes. The two-door and four-door share the front suspension, so a level is the same idea on both, though the shorter truck feels the change a touch more. Tell us the body style and the package and we order accordingly.
Will a Bronco leveling kit void my warranty?
A bolt-on spacer a shop can reverse is not the same as cutting or welding. Keep the stock coil-overs and we can return the Bronco to factory height, which heads off most warranty questions.
How long does a Bronco leveling kit take?
A front spacer and alignment on a Bronco is a half-day job, and the SUV is back on the road the same day. Taller coil-over work can run longer, and we tell you which before we start.
Why Valley drivers bring their trucks here
- Lift, leveling, wheels and alignment under one roof, corrected and aligned.
- Written estimate before any part is ordered, with the extras called out.
- Fitment confirmed on your exact truck before you buy tires or wheels.
- Road-tested and re-torqued, with a settling check after the first miles.
Request a quote
Tell us your truck and what you want. We reply with a written quote for the build.