TX 4x4
Written quote Get a quote

Toyota 4Runner Lift Kit

A suspension lift kit for the Toyota 4Runner that clears 33s and adds real trail clearance, with the geometry correction a coil-sprung, four-link SUV needs to stay stable on the highway.

A suspension lift kit hardware set laid out on a bright shop apron

Toyota 4Runner Lift Kit at a glance

Two-inch 4Runner lift with spacers and shocks
$1,100–$2,000
Two-and-a-half to three-inch 4Runner suspension lift
$1,800–$3,000
Front coil-over conversion for the 4Runner
$1,600–$2,800
Four-wheel alignment after the lift
$95–$190

Toyota 4Runner lift kit that keeps the four-link honest

The 4Runner is a coil-spring SUV at both ends, not a leaf-sprung pickup, so a lift has to respect a four-link rear Toyota tuned for the trail and the school run alike. Past two inches the front struts run out of droop, the rear coils overspring, and the truck starts to feel nervous at 70 mph. A proper 4Runner kit raises the front with new coils, the rear with taller springs, and re-centers the geometry.

  • Two to three inches that keeps the 4Runner composed on the highway
  • Rear coil replacement rather than a block under a spring
  • Caster correction and a track-width check after the lift
A suspension lift kit hardware set laid out on a bright shop apron

Toyota 4Runner lift kit fitment

Fifth-generation 4Runners share a platform across trims, but a KDSS truck and a TRD Pro sit and articulate at different heights, and the front strut length differs between them. We confirm the year, trim and whether the SUV carries KDSS or the TRD suspension before we order.

  • Fifth-generation 4Runner, 2011 through 2024
  • Sixth-generation 4Runner from 2025
  • Lift of 2 to 3 inches on most 4Runners
  • Four-wheel-drive and two-wheel-drive, KDSS and TRD trims

What the 4Runner lift kit includes

A 4Runner lift speaks in springs, not blocks, because a spacer under a coil changes nothing about travel. We bring the front and rear springs, the shocks and the correction the taller stance needs.

  • Front coil-over spacers or replacement front coils
  • Rear coil springs sized to the new height
  • Matched shocks for the longer travel front and rear
  • Upper control arms or ball-joint correction for camber
  • Panhard-bar and brake-line adjustment for the taller rear
  • Four-wheel alignment and a road test at the end

How we install a Toyota 4Runner lift kit

The 4Runner goes up in a fixed order so the SUV still tracks straight and the rear stays planted under load.

  1. 1. Confirm the 4Runner generation, trim and KDSS or TRD package.

  2. 2. Check the ride height and inspect the front struts and rear coils.

  3. 3. Fit the front lift and the control-arm correction.

  4. 4. Replace the rear coils and fit the matched shocks.

  5. 5. Reset the panhard bar so the rear axle stays centered.

  6. 6. Align camber, caster, toe and thrust.

  7. 7. Road-test, check the track and re-torque everything.

What a Toyota 4Runner lift kit costs

A 4Runner lift is springs and shocks at both ends plus the geometry work a coil four-link needs, and the price climbs with system height. Figures vary by year and trim, so treat every one of them as a range.

Two-inch 4Runner lift with spacers and shocks
$1,100–$2,000 installed
Two-and-a-half to three-inch 4Runner suspension lift
$1,800–$3,000
Front coil-over conversion for the 4Runner
$1,600–$2,800
Four-wheel alignment after the lift
$95–$190
Rear spring upgrade for a loaded 4Runner
$450–$950

What a lifted 4Runner changes underneath

A coil-sprung SUV punishes shortcuts that a leaf pickup forgives. Lift a 4Runner without enough droop and it skips over washboard; skip the panhard-bar reset and the rear axle sits off-center and chews the outside of a rear tire. Those geometry parts are the difference between a 4Runner that still drives and one that never feels right again.

  • Rear axle kept centered under the body
  • Droop kept in range so the wheels stay planted
  • A 4Runner that aligns to its own numbers, not the rack default

From the bay

Questions about this build

How much lift can a 4Runner take safely?

Two to three inches is the honest window on a fifth-generation 4Runner, because the four-link rear and the front struts still have travel. Past three the truck needs more than springs to stay composed, and we say so before you spend.

Will a 4Runner lift hurt the ride?

Done correctly it can ride better, because fresh shocks and springs replace worn originals. Done as a tall block-style lift, the 4Runner loses droop and skips, which is the complaint you read about online and the one we design around.

Do I need a new panhard bar on a lifted 4Runner?

You need it adjustable or corrected, because lifting the rear swings the axle sideways and off-center. We reset the track with an adjustable bar so a lifted 4Runner does not drag a rear tire on one side.

Can you lift a two-wheel-drive 4Runner?

Yes, and two-wheel-drive 4Runners take a front lift easily. The rear springs differ from the four-wheel-drive truck because the axle is lighter, so tell us the drivetrain and we spring it to match.

What tire fits a 4Runner with a three-inch lift?

A three-inch 4Runner lift usually clears a 285/70 or a 33, and sometimes a 34 with a body-mount chop. We measure your wheel offset and fender clearance on the truck before you commit to a set.

Does lifting a 4Runner affect its warranty?

A suspension lift can affect a warranty claim on the parts it touches, but a reversible bolt-on and the stock parts kept on the shelf go a long way. We explain exactly what is involved before we start.

Why Valley drivers bring their trucks here

  • Lift, leveling, wheels and alignment under one roof, corrected and aligned.
  • Written estimate before any part is ordered, with the extras called out.
  • Fitment confirmed on your exact truck before you buy tires or wheels.
  • Road-tested and re-torqued, with a settling check after the first miles.

Request a quote

Tell us your truck and what you want. We reply with a written quote for the build.