Nissan Frontier Lift Kit
A suspension lift kit for the Nissan Frontier that clears 33s, with the control-arm and driveshaft work a coil-over mid-size truck needs to stay easy to drive.
Nissan Frontier Lift Kit at a glance
- Two-inch Frontier lift with spacers and shocks
- $980–$1,780
- Two-and-a-half to three-inch Frontier suspension lift
- $1,550–$2,650
- Three-inch Frontier lift with upper control arms
- $2,150–$3,350
- Four-wheel alignment after the Frontier lift
- $90–$180
Nissan Frontier lift kit for a value mid-size that still works
The Frontier is a compact, honest body-on-frame truck, coil-over up front and leaves out back, and a kit meant for a heavier truck will feel harsh under it. We lift the Frontier nose on taller coils and the tail on a lift block or an extra leaf, add corrected arms beyond two and a half inches and check the driveshaft angle. It swallows 33s and keeps the simple road manners Frontier owners count on.
- Two to three inches sized to the Frontier's weight
- Corrected arms past two and a half inches
- Driveshaft and steering checked for the higher stance
Nissan Frontier lift kit fitment
The 2005-2021 D40 Frontier and the 2022-and-newer D41 take different front hardware, and a PRO-4X already rides on a taller setup. We check the year, cab and package first, then pick the coils and arms.
- Second-generation Frontier, 2005 through 2021
- Third-generation Frontier from 2022
- Lift of 2 to 3 inches depending on tire size
- King Cab and Crew Cab, two- and four-wheel drive, PRO-4X
What the Nissan Frontier lift kit includes
A mid-size does not want half-ton springs, and making them too stiff is its own error. We match coils, dampers and arms to the Frontier so it stays comfortable while sitting higher.
- Front coil spacers or replacement coil-overs for the Frontier
- Rear block or add-a-leaf for the Frontier leaf pack
- Longer shocks valved for the Frontier's weight
- Upper control arms that restore camber range
- Driveshaft spacer where the angle needs correcting
- Brake-line brackets, bump stops and a full torque sheet
How we install a Nissan Frontier lift kit
The Frontier goes up in a set order so the truck comes back aligned and smooth rather than stiff and skittish.
-
1. Confirm the Frontier year, cab, drivetrain and trim.
-
2. Measure the corners and check the coil-overs and leaf springs.
-
3. Install the front lift and corrected arms where needed.
-
4. Set the rear height with a block or an add-a-leaf.
-
5. Fit the longer shocks and reset the bump stops.
-
6. Align camber, caster, toe and thrust at the raised height.
-
7. Road-test, check the driveshaft angle and re-torque.
What a Nissan Frontier lift kit costs
A Frontier lift is cheaper than a half-ton job because the truck is lighter and the parts are smaller, but it still climbs when you pass the point where control arms become mandatory. Figures vary by generation and trim, so treat them as ranges.
- Two-inch Frontier lift with spacers and shocks
- $980–$1,780 installed
- Two-and-a-half to three-inch Frontier suspension lift
- $1,550–$2,650
- Three-inch Frontier lift with upper control arms
- $2,150–$3,350
- Four-wheel alignment after the Frontier lift
- $90–$180
- Rear add-a-leaf for a working Frontier
- $390–$860
What a lifted Frontier changes underneath
Because the Frontier is a value truck, owners are careful about money, and the cheapest lift is the one that skips the correction parts. That shortcut shows up as a truck that shimmies and eats front tires. Corrected arms and a driveshaft-angle check are the parts that make the difference between a lifted Frontier that works and one that argues with every lane.
- Camber held so the Frontier still aligns
- Driveshaft kept smooth at the raised angle
- A Frontier that stays easy to drive tall
From the bay
Questions about this build
How much lift can a Frontier take?
Two to three inches is the sensible range on a Frontier, because the light truck wants travel and the driveshaft angle stays healthy. Past three the arms and driveshaft need correcting, which we price up front.
Will a lifted Frontier ride stiff?
Only if the springs are over-spec for the truck. We size the coils and shocks to the Frontier's weight so it sits tall without beating you up, which is the mistake a generic heavy-duty lift makes on a mid-size.
Do I need new control arms on a lifted Frontier?
Past about two and a half inches, yes. The stock Frontier arms run out of ball-joint range and cannot hold camber, so corrected arms are the only way to align it. Below that, originals are usually fine.
What tires fit a three-inch Frontier lift?
A three-inch lift usually clears a 33 on a Frontier with the right offset, and a 32 without effort. We check wheel offset and fender clearance on your truck before any tire is ordered.
Can you lift a two-wheel-drive Frontier?
Yes, and a two-wheel-drive Frontier lifts cleanly for stance and clearance. The front hardware differs from the four-wheel-drive kit, so we order by drivetrain and confirm the springs first.
Does lifting a Frontier void the warranty?
A suspension lift can affect a warranty claim on the parts it touches, but a reversible bolt-on with the stock parts kept helps a lot. We explain exactly what is involved before we start.
Why Valley drivers bring their trucks here
- Lift, leveling, wheels and alignment under one roof, corrected and aligned.
- Written estimate before any part is ordered, with the extras called out.
- Fitment confirmed on your exact truck before you buy tires or wheels.
- Road-tested and re-torqued, with a settling check after the first miles.
Request a quote
Tell us your truck and what you want. We reply with a written quote for the build.