Jeep Wrangler Lift Kit
A suspension lift kit for the solid-axle Jeep Wrangler that clears 35s, with the caster, track-bar and driveshaft work a coil-sprung live-axle 4x4 needs to keep driving well.
Jeep Wrangler Lift Kit at a glance
- Two-inch Wrangler lift with coils and shocks
- $1,200–$2,100
- Two-and-a-half to three-inch Wrangler lift
- $1,900–$3,100
- Three-inch Wrangler lift with arms and track bars
- $2,600–$3,900
- Toe set and axle centering on the Jeep
- $80–$150
Jeep Wrangler lift kit for a coil-sprung live axle
Lifting a Wrangler is different from lifting a strut truck: the front is a live axle on coils, so camber is fixed and the things that matter are caster, the track bars and the driveshaft angles. We swap the coils, fit longer shocks, add adjustable control arms past three inches and correct the caster the taller stance steals. The Jeep clears 35s and still drives down the highway without the death wobble people fear.
- Two to three inches on the Wrangler's coil springs
- Adjustable arms and corrected caster past three inches
- Track bars and driveshaft angles set for the new height
Jeep Wrangler lift kit fitment
The JL and the JK take different lift hardware, and a Rubicon or a 4xe sits and weighs differently from a base Sport, so spring rates are not interchangeable. We confirm the generation, body and trim before the coils are ordered.
- JL Wrangler, 2018 and newer
- JK Wrangler, 2007 through 2018
- Lift of 2 to 3.5 inches depending on tire size
- Two- and four-door, Sport through Rubicon, including the 4xe
What the Jeep Wrangler lift kit includes
Because the Wrangler is a live axle, the parts list revolves around caster and centering rather than strut geometry, and the shocks get to control the ride the coils set up.
- Replacement front and rear coils for the Wrangler
- Longer shocks valved to the Jeep's weight
- Adjustable or longer control arms for caster and pinion angle
- Front and rear adjustable track bars to center both axles
- Sway-bar end links and brake-line extensions
- Driveshaft-angle check and a full torque sheet
How we install a Jeep Wrangler lift kit
The Wrangler goes up in a fixed sequence so both live axles end up centered and the caster comes back into range.
-
1. Confirm the Wrangler generation, body and trim.
-
2. Measure the ride height and inspect the coils, arms and driveshafts.
-
3. Swap the coils and fit the longer shocks.
-
4. Install the control arms and set caster and pinion angle.
-
5. Fit the track bars and center both axles.
-
6. Set toe, check the sway-bar links and the brake lines.
-
7. Drive it, watch for wobble and re-torque the whole job.
What a Jeep Wrangler lift kit costs
A Wrangler lift is coils and shocks plus the arms and track bars the height requires, and it climbs fast past three inches. Figures differ by generation and trim, so read them as ranges and let us quote your build. The price varies by year and trim.
- Two-inch Wrangler lift with coils and shocks
- $1,200–$2,100 installed
- Two-and-a-half to three-inch Wrangler lift
- $1,900–$3,100
- Three-inch Wrangler lift with arms and track bars
- $2,600–$3,900
- Toe set and axle centering on the Jeep
- $80–$150
- Driveshaft or pinion-angle correction
- $300–$700
What a lifted Wrangler demands
A Wrangler lifted without the caster correction wanders, and one lifted without re-centering the axles dog-tracks and chews tires. Those two things, not the coils, decide whether a lifted Jeep drives straight. Corrected arms and adjustable track bars are the parts that turn a nervous lifted Wrangler back into a Jeep you can take on a long trip.
- Caster corrected so the Jeep self-centers
- Both axles centered under the body
- Driveshaft angles checked for vibration
From the bay
Questions about this build
How much can you lift a Wrangler?
Two to three inches is the honest range before the parts list grows, because caster and the driveshaft angles stay workable. Past three the Jeep needs adjustable arms and often a driveshaft, and we build those into the quote.
Will a lifted Wrangler get death wobble?
Death wobble comes from worn or loose steering parts, not the lift alone, but a bad lift makes it worse. We re-torque the front end, set caster and check the track bar so a lifted Wrangler stays planted at highway speed.
Do I need new driveshafts on a lifted Wrangler?
At three inches or more the front pinion angle often needs correcting, and a stock front shaft can vibrate. We measure the angle and add a shaft or a correction when the Jeep needs it rather than guessing.
What tires fit a lifted Wrangler?
A two-to-three-inch lift usually fits a 35 on a Wrangler with the right offset, and a 33 without effort. We check wheel offset and fender clearance on your Jeep before any tire is ordered.
Can you lift a 4xe Wrangler?
Yes. The 4xe carries more weight low in the chassis from the battery, so we choose spring rates for it rather than reusing a gas Wrangler's. The rest of the lift is the same live-axle work.
Does lifting a Wrangler affect its warranty?
A suspension lift can affect a claim on the parts it touches, and Jeep dealers vary. A reversible install with the stock parts kept helps, and we explain what is involved before we start.
Why Valley drivers bring their trucks here
- Lift, leveling, wheels and alignment under one roof, corrected and aligned.
- Written estimate before any part is ordered, with the extras called out.
- Fitment confirmed on your exact truck before you buy tires or wheels.
- Road-tested and re-torqued, with a settling check after the first miles.
Request a quote
Tell us your truck and what you want. We reply with a written quote for the build.