Jeep Gladiator Lift Kit
A suspension lift kit for the Jeep Gladiator that clears 35s, with the caster, track-bar and driveshaft work a coil-sprung live-axle pickup needs to keep towing straight.
Jeep Gladiator Lift Kit at a glance
- Two-inch Gladiator lift with coils and shocks
- $1,250–$2,200
- Two-and-a-half to three-inch Gladiator lift
- $1,950–$3,200
- Three-inch Gladiator lift with arms and track bars
- $2,700–$4,000
- Toe set and axle centering on the truck
- $80–$150
Jeep Gladiator lift kit for a live-axle pickup that still tows
The Gladiator is a coil-sprung, live-axle pickup with a longer frame than the Wrangler, so a lift has to keep caster, both track bars and the rear pinion angle in check while the truck still pulls a trailer. We swap the coils, add longer shocks, fit adjustable arms past three inches and re-center both axles. The Gladiator clears 35s, keeps its bed and stays steady with a load behind it.
- Two to three inches on the Gladiator's coil springs
- Adjustable arms and corrected caster past three inches
- Both track bars reset so a loaded Gladiator tracks straight
Jeep Gladiator lift kit fitment
The Gladiator shares the JL front end but carries a longer, heavier rear, so spring rates differ from the Wrangler's and a Rubicon or Mojave is sprung differently again. We confirm the year and trim before the coils are chosen.
- JT Gladiator, 2020 and newer
- Lift of 2 to 3.5 inches depending on tire size
- Sport through Rubicon and Mojave, soft and hard top
- Gasoline Gladiators with the 3.6 and 3.0 diesel
What the Jeep Gladiator lift kit includes
Because the Gladiator is a live-axle truck, the parts list centers on caster and centering rather than strut geometry, and the rear gets extra attention because of the bed and the towing the truck was bought to do.
- Replacement front and rear coils for the Gladiator
- Longer shocks valved to the truck's weight and bed
- Adjustable or longer control arms for caster and pinion angle
- Front and rear adjustable track bars to center both axles
- Sway-bar end links, brake-line extensions and a rear-brake check
- Driveshaft-angle check and a full torque sheet
How we install a Jeep Gladiator lift kit
The Gladiator lift runs in a fixed sequence so both live axles end up centered and the caster comes back into range on the longer frame.
-
1. Confirm the Gladiator year, trim and drivetrain.
-
2. Check the ride height and inspect the coils, arms and driveshafts.
-
3. Swap the coils and fit the longer shocks.
-
4. Install the control arms and set caster and pinion angle.
-
5. Fit the track bars and center both axles.
-
6. Set toe, check the sway-bar links and the brake lines.
-
7. Drive it with a load, watch for wobble and re-torque.
What a Jeep Gladiator lift kit costs
A Gladiator lift is coils and shocks plus the arms and track bars the height requires, and it climbs fast past three inches because the truck is long and heavy. Figures differ by trim, so read them as ranges and let us quote your build. Costs vary by year and trim.
- Two-inch Gladiator lift with coils and shocks
- $1,250–$2,200 installed
- Two-and-a-half to three-inch Gladiator lift
- $1,950–$3,200
- Three-inch Gladiator lift with arms and track bars
- $2,700–$4,000
- Toe set and axle centering on the truck
- $80–$150
- Driveshaft or pinion-angle correction
- $320–$720
What a lifted Gladiator demands
A Gladiator lifted without caster correction wanders when empty and feels light when loaded, and one lifted without re-centering the axles dog-tracks and chews tires. Because the truck has a bed and tows, the rear angles matter more than they do on a short-wheelbase Jeep, and correcting them is what keeps a lifted Gladiator steady with a trailer.
- Caster corrected so the truck self-centers loaded or empty
- Both axles centered under the longer frame
- Rear pinion angle checked for towing vibration
From the bay
Questions about this build
How much can you lift a Gladiator?
Two to three inches is the honest range before the parts list grows, because caster and the rear pinion angle stay workable and the truck still tows. Past three the Gladiator wants adjustable arms and often driveshaft work.
Will a lifted Gladiator still tow?
Yes, and towing is why the angles matter. We re-center both axles and check the rear pinion angle so a lifted Gladiator with a trailer behind it does not vibrate, sag or wander under load.
Do I need a front driveshaft on a lifted Gladiator?
At three inches or more the front pinion angle often needs correcting, and a stock front shaft can vibrate. We measure the angle and add a shaft or a correction when the Gladiator needs it rather than guessing.
What tires fit a lifted Gladiator?
A two-to-three-inch lift usually fits a 35 on a Gladiator with the right offset, and a 33 without effort. We check wheel offset and fender clearance on your truck before any tire is ordered.
Can you lift a Mojave Gladiator?
Yes. A Mojave already rides taller and softer with its own shocks, so we choose coils and dampers that suit it rather than reusing a Rubicon's setup. The rest of the lift is the same live-axle work.
Does lifting a Gladiator affect its warranty?
A suspension lift can affect a claim on the parts it touches, and Jeep dealers vary. A reversible install with the stock parts kept helps, and we explain what is involved before we start.
Why Valley drivers bring their trucks here
- Lift, leveling, wheels and alignment under one roof, corrected and aligned.
- Written estimate before any part is ordered, with the extras called out.
- Fitment confirmed on your exact truck before you buy tires or wheels.
- Road-tested and re-torqued, with a settling check after the first miles.
Request a quote
Tell us your truck and what you want. We reply with a written quote for the build.