TX 4x4
Written quote Get a quote

Honda Ridgeline Lift Kit

A suspension lift for the unibody Honda Ridgeline that adds clearance for gravel and light trail, sized for a car-based pickup rather than a body-on-frame truck.

A front strut spacer and leveling kit laid out on a bright shop apron

Honda Ridgeline Lift Kit at a glance

Two-inch Ridgeline lift with struts and spacers
$1,000–$1,800
Two-and-a-half-inch Ridgeline lift with rear spacers
$1,550–$2,600
Taller strut package for the Ridgeline
$1,800–$3,000
Four-wheel alignment after the lift
$90–$180

Honda Ridgeline lift kit for the pickup that drives like a car

A Ridgeline lift cannot borrow the playbook from a frame truck, because the Ridgeline is a crossover pickup: struts up front, an independent rear and no separate frame at all. Height arrives through longer front struts and a spacer at the back, and the important part is keeping the crossover geometry inside its design window. That is genuine help on gravel and campsites, and not a route to rock crawling.

  • Two to three inches without over-stressing the unibody
  • Front strut-and-spacer package, rear spacer to match
  • Clearance for gravel and light trail, not rock duty
A front strut spacer and leveling kit laid out on a bright shop apron

Honda Ridgeline lift kit fitment

Ridgeline running gear is consistent across trims, but the TrailSport and HPD trucks start a little taller and the all-wheel-drive version carries more front weight. We confirm the year and drivetrain so the lift matches the truck rather than a catalog figure.

  • Second-generation Ridgeline, 2017 and newer
  • Lift of 2 to 2.5 inches on the unibody platform
  • Front-wheel drive and i-VTM4 all-wheel drive
  • Sport through Black Edition and TrailSport

What the Honda Ridgeline lift kit includes

What we add to a Ridgeline is deliberately short, because the crossover platform has no appetite for a tall, heavy kit. Springs and alignment stay inside the Ridgeline's design window.

  • Front strut spacers or longer front struts for the Ridgeline
  • Rear spring spacers for the independent rear
  • Shocks matched to the taller, light-duty stance
  • Camber and caster correction within the strut's range
  • Subframe, brake-line and harness clearance checks
  • Four-wheel alignment and a road test to close the job

How we lift a Honda Ridgeline

A Ridgeline lift follows a tight, fixed sequence, since the crossover front end punishes any guesswork.

  1. 1. Confirm the Ridgeline year and drivetrain.

  2. 2. Measure the ride height and inspect the front struts and rear springs.

  3. 3. Install the front struts and spacers.

  4. 4. Fit the rear spring spacers and matched shocks.

  5. 5. Correct camber and caster within the strut range.

  6. 6. Align all four corners and set thrust angle.

  7. 7. Road-test for rub, wander and a centered wheel.

What a Honda Ridgeline lift kit costs

A Ridgeline lift uses less hardware than a frame-truck kit, so it costs less, though the total still follows the height you pick. The number moves with the model year and drivetrain, so use the ranges as a guide and let us price yours. Pricing varies by year and trim.

Two-inch Ridgeline lift with struts and spacers
$1,000–$1,800 installed
Two-and-a-half-inch Ridgeline lift with rear spacers
$1,550–$2,600
Taller strut package for the Ridgeline
$1,800–$3,000
Four-wheel alignment after the lift
$90–$180
Rear spacer kit for the independent rear
$340–$720

What a lifted Ridgeline can and cannot do

Done within reason, a lifted Ridgeline is a handier gravel-road and campsite truck, and no rock crawler. It gains clearance and a bigger tire, but keeps the crossover ceiling: no low range, a light subframe and a payload figure a heavy kit would only hurt. We make the Ridgeline more useful on loose ground while leaving its quiet, easy manners alone.

  • Real clearance for gravel and forest roads
  • Unibody limits respected, not fought
  • The quiet, car-like manners kept

From the bay

Questions about this build

Can you lift a unibody Honda Ridgeline?

Yes, within limits. A Ridgeline lift uses longer front struts and a rear spacer rather than a frame lift, and we keep the height and parts inside what the crossover platform is designed for. It is clearance for loose surfaces, not rock duty.

How much lift is safe on a Ridgeline?

Two to two and a half inches is the honest range. Past that the strut geometry and the crossover subframe are asked to do something they were not designed for, and the truck stops feeling like a Ridgeline.

Does lifting a Ridgeline hurt its mileage?

The lift adds a little drag, but the bigger hit comes from a taller, heavier tire. A sensible all-terrain on a modest Ridgeline lift keeps the civil mileage that made the truck appealing in the first place.

Will a lifted Ridgeline still tow?

Yes, and towing is part of why the Ridgeline exists. We size the kit so the rear stays supported under a light trailer, and we keep the change reversible if you later return the truck to stock.

Can you lift a front-wheel-drive Ridgeline?

Yes. Front-wheel-drive and i-VTM4 all-wheel-drive Ridgelines take the same front strut work, though the all-wheel-drive truck carries a bit more nose weight. We measure your truck first and tell you how much lift it actually needs.

What tire fits a lifted Ridgeline?

A two-to-two-and-a-half-inch lift usually fits a 245 or a 235/70 on the Ridgeline's stock wheel. We check wheel-liner and fender clearance at full lock on your truck before the tires are ordered.

Why Valley drivers bring their trucks here

  • Lift, leveling, wheels and alignment under one roof, corrected and aligned.
  • Written estimate before any part is ordered, with the extras called out.
  • Fitment confirmed on your exact truck before you buy tires or wheels.
  • Road-tested and re-torqued, with a settling check after the first miles.

Request a quote

Tell us your truck and what you want. We reply with a written quote for the build.