Ford Ranger Lift Kit
A suspension lift kit for the Ford Ranger that adds clearance for 33s, with the control-arm and driveshaft work a small midsize needs to keep its easy road manners.
Ford Ranger Lift Kit at a glance
- Two-inch Ranger lift with spacers and shocks
- $950–$1,750
- Two-and-a-half to three-inch Ranger suspension lift
- $1,500–$2,600
- Three-inch Ranger lift with upper control arms
- $2,100–$3,300
- Four-wheel alignment after the Ranger lift
- $90–$180
Ford Ranger lift kit for a small truck that stays easy to drive
The Ranger is the lightest of the body-on-frame midsize trucks, so a lift that suits a bigger truck will ride stiff under it. We raise the Ranger front with taller coils and the rear with a block or an add-a-leaf, add corrected arms past two and a half inches and check the driveshaft angle the new height changes. The truck clears 33s and still parks like the compact it is.
- Two to three inches sized to the Ranger's lighter weight
- Corrected arms past two and a half inches
- Driveshaft and steering checked for the higher stance
Ford Ranger lift kit fitment
The 2019-2023 Ranger and the 2024-and-newer truck take different front parts, and the Tremor package already carries a taller, softer suspension. We confirm the year, cab and package before the coil and arm numbers are chosen.
- Fifth-generation Ranger, 2019 through 2023
- Sixth-generation Ranger from 2024
- Lift of 2 to 3 inches depending on tire size
- SuperCab and SuperCrew, two- and four-wheel drive, FX4 and Tremor
What the Ford Ranger lift kit includes
On a light midsize the springs do not need to be as heavy as a half-ton's, and over-specifying them is its own mistake. We size the coils and shocks to the Ranger so it rides well as well as sits tall.
- Front coil spacers or replacement coil-overs for the Ranger
- Rear block or add-a-leaf for the Ranger leaf pack
- Longer shocks valved for the Ranger's lighter weight
- Upper control arms that restore camber range
- Driveshaft spacer where the angle needs correcting
- Brake-line brackets, end links and a full torque sheet
How we install a Ford Ranger lift kit
The Ranger goes up in a set order so the light truck comes back aligned and smooth rather than stiff and skittish.
-
1. Confirm the Ranger year, cab, drivetrain and trim.
-
2. Measure the corners and check the coil-overs and leaf springs.
-
3. Install the front lift and corrected arms where needed.
-
4. Set the rear height with a block or an add-a-leaf.
-
5. Fit the longer shocks and reset the end links.
-
6. Align camber, caster, toe and thrust at the raised height.
-
7. Road-test, check driveshaft angle and re-torque.
What a Ford Ranger lift kit costs
A Ranger lift is cheaper than a half-ton job because the truck is lighter and the parts are smaller, but it still climbs when you pass the point where control arms become mandatory. Figures vary by generation and trim, so treat them as ranges.
- Two-inch Ranger lift with spacers and shocks
- $950–$1,750 installed
- Two-and-a-half to three-inch Ranger suspension lift
- $1,500–$2,600
- Three-inch Ranger lift with upper control arms
- $2,100–$3,300
- Four-wheel alignment after the Ranger lift
- $90–$180
- Rear add-a-leaf for a working Ranger
- $380–$850
What a lifted Ranger changes underneath
Because the Ranger is light, it feels geometry problems sooner than a heavy truck: too little droop and it skips, and arms out of range and it shimmies. Correcting the arms and the driveshaft angle is what lets the small truck carry a 33 without the nervousness that owners complain about in a cheap lift.
- Camber held so the light truck still aligns
- Driveshaft kept smooth at the raised angle
- A Ranger that stays easy to drive tall
From the bay
Questions about this build
How much lift can a Ranger take?
Two to three inches is the sensible range on a Ranger, because the light truck wants travel and the driveshaft angle stays healthy. Past three the arms and driveshaft need correcting, which we price up front.
Will a lifted Ranger ride stiff?
Only if the springs are over-spec for a light truck. We size the coils and shocks to the Ranger's weight so it sits tall without beating you up, which is the mistake a generic heavy-duty lift makes on a small midsize.
Do I need new control arms on a lifted Ranger?
Past about two and a half inches, yes. The stock Ranger arms run out of ball-joint range and cannot hold camber, so corrected arms are the only way to align it. Below that, originals are usually fine.
What tires fit a three-inch Ranger lift?
A three-inch lift usually clears a 33 on a Ranger with the right offset, and a 32 without effort. We check wheel offset and fender clearance on your truck before any tire is ordered.
Can you lift a two-wheel-drive Ranger?
Yes, and a two-wheel-drive Ranger lifts cleanly for stance and clearance. The front hardware differs from the four-wheel-drive kit because the spindles and coil-overs are not identical, so we order by drivetrain.
Does lifting a Ranger void the warranty?
A suspension lift can affect a warranty claim on the parts it touches, but a reversible bolt-on with the stock parts kept goes a long way. We explain exactly what is involved before we start the job.
Why Valley drivers bring their trucks here
- Lift, leveling, wheels and alignment under one roof, corrected and aligned.
- Written estimate before any part is ordered, with the extras called out.
- Fitment confirmed on your exact truck before you buy tires or wheels.
- Road-tested and re-torqued, with a settling check after the first miles.
Request a quote
Tell us your truck and what you want. We reply with a written quote for the build.