TX 4x4
Written quote Get a quote

Ford Maverick Lift Kit

A suspension lift for the unibody Ford Maverick that adds clearance for light trail and gravel duty, sized for a car-based compact rather than a body-on-frame truck.

A suspension lift kit hardware set laid out on a bright installation bay floor

Ford Maverick Lift Kit at a glance

Two-inch Maverick lift with struts and spacers
$1,000–$1,800
Two-and-a-half-inch Maverick lift with rear spacers
$1,600–$2,700
Taller strut package for the Maverick
$1,900–$3,100
Four-wheel alignment after the Maverick lift
$90–$180

Ford Maverick lift kit for the truck that thinks it is a car

A lift on a Maverick is not a lifted F-150 in miniature, because there is no frame, no live rear axle and no low range. The unibody truck rides on a front strut and an independent rear, so the height comes from taller front struts and a rear spacer, and the geometry work is about keeping the car-based suspension in its designed range. It is honest clearance for gravel, fire roads and light trail, not rock crawling.

  • Two to three inches without over-stressing the unibody platform
  • Front strut-and-spacer package, rear spacer to match
  • Clearance for gravel and light trail, not rock duty
A suspension lift kit hardware set laid out on a bright installation bay floor

Ford Maverick lift kit fitment

Maverick running gear is consistent across trims so far, but the hybrid and the EcoBoost have different front weight and the Tremor starts taller. We confirm the year, powertrain and package so the lift matches the truck rather than a catalog figure.

  • Maverick from 2022 onward
  • Lift of 2 to 3 inches on the unibody platform
  • Hybrid and 2.0 EcoBoost powertrains
  • Front-wheel drive and all-wheel drive, including Tremor

What the Ford Maverick lift kit includes

The parts list for a Maverick is deliberately smaller than a truck lift, because the platform does not want a tall, heavy kit. We keep the springs and the alignment within what the unibody was designed to take.

  • Front strut spacers or longer front struts for the Maverick
  • Rear spring spacers for the independent rear
  • Shocks matched to the taller, light-duty stance
  • Camber and caster correction within the strut's range
  • Subframe, brake-line and harness clearance checks
  • Four-wheel alignment and a road test to close the job

How we lift a Ford Maverick

A Maverick lift follows a short, careful order because the platform is designed as a car, and the front end does not tolerate guesswork.

  1. 1. Confirm the Maverick year, powertrain and package.

  2. 2. Read the ride height, then inspect the front struts and rear springs.

  3. 3. Install the front struts and spacers.

  4. 4. Fit the rear spring spacers and matched shocks.

  5. 5. Correct camber and caster within the strut range.

  6. 6. Align all four corners and set thrust angle.

  7. 7. Road-test for rub, wander and a centered wheel.

What a Ford Maverick lift kit costs

Because the Maverick is light and the kit is modest, a lift costs less than a body-on-frame job, though it still rises with the height and the parts. Figures vary by year and powertrain, so read them as ranges and let us quote.

Two-inch Maverick lift with struts and spacers
$1,000–$1,800 installed
Two-and-a-half-inch Maverick lift with rear spacers
$1,600–$2,700
Taller strut package for the Maverick
$1,900–$3,100
Four-wheel alignment after the Maverick lift
$90–$180
Rear spacer kit for the independent rear
$350–$750

What a lifted Maverick can and cannot do

A lifted Maverick is a better gravel-road and campsite truck, not a rock crawler. It gains ground clearance and a taller tire, but it keeps its unibody limits: no low range, a car-derived subframe and a payload rating that a tall, heavy kit would only hurt. We build the Maverick to be more useful on loose surfaces without pretending it became a Jeep.

  • Real clearance for gravel and forest roads
  • Unibody limits respected, not fought
  • The little truck's frugal, easy manners kept

From the bay

Questions about this build

Can you lift a unibody Ford Maverick?

Yes, within limits. A Maverick lift uses longer front struts and a rear spacer rather than a frame lift, and we keep the height and parts inside what the car-based platform is designed for. It is clearance for loose surfaces, not rock duty.

How much lift is safe on a Maverick?

Two to three inches is the honest range. Past that the strut geometry and the car-derived subframe are being asked to do something they were not designed for, and the truck stops feeling like a Maverick.

Does lifting a Maverick hurt its mileage?

The lift adds a little drag, but the bigger hit comes from a taller, heavier tire. A sensible all-terrain on a modest Maverick lift keeps the frugal mileage that made the truck appealing in the first place.

Will a lifted Maverick still tow?

Yes, and towing is part of why the Maverick exists. We size the kit so the rear stays supported under a light trailer, and we keep the change reversible if you later return the truck to stock.

Can you lift a front-wheel-drive Maverick?

Yes. Front-wheel-drive and all-wheel-drive Mavericks take the same front strut work, though the Tremor starts taller. We measure your truck first and tell you honestly how much lift it actually needs.

What tire fits a lifted Maverick?

A two-to-three-inch lift usually fits a 245 or a 235/70 on the Maverick's stock wheel. We check wheel-liner and fender clearance at full lock on your truck before the tires are ordered.

Why Valley drivers bring their trucks here

  • Lift, leveling, wheels and alignment under one roof, corrected and aligned.
  • Written estimate before any part is ordered, with the extras called out.
  • Fitment confirmed on your exact truck before you buy tires or wheels.
  • Road-tested and re-torqued, with a settling check after the first miles.

Request a quote

Tell us your truck and what you want. We reply with a written quote for the build.