Ford F-150 Leveling Kit
A front leveling kit for the Ford F-150 that removes the factory rake, clears a 33-inch tire and preserves the rear leaf pack and payload rating the best-selling half-ton was built around.
Ford F-150 Leveling Kit at a glance
- Basic front spacer kit for the F-150
- $280–$580
- Spacer kit plus new front struts
- $600–$1,100
- Coil-over leveling setup for the F-150
- $1,000–$1,800
- Alignment folded into the same visit
- $95–$190
Ford F-150 leveling kit for a half-ton that sits square
Every F-150 leaves the line with the rear higher than the front, and the gap shows the moment you step up a tire size. Leveling the F-150 raises only the front so the truck sits even, a 33-inch tire clears with room to spare and the rear leaf springs keep the payload and tow ratings that make an F-150 an F-150.
- Front-only lift that squares the F-150 stance
- Clears a 33-inch tire on the stock or near-stock wheel
- Rear leaf pack and door-sticker ratings left alone
Ford F-150 leveling kit fitment
The front end changed across generations, and the aluminum trucks from 2015 take a different strut top than the steel-bodied 2009-2014 trucks. We confirm the generation, engine and whether the truck carries the FX4 package, which already sits differently than a base XL.
- Twelfth-generation F-150, roughly 2009 through 2014
- Thirteenth-generation aluminum F-150, 2015 through 2020
- Fourteenth-generation F-150 from 2021 with its redesigned front
- Height range of 1.5 to 2.5 inches at the front
- Two- and four-wheel drive, XL through Platinum, FX4 and Tremor trims
What the Ford F-150 leveling kit includes
An F-150 spacer is a small part, but the work around it is what keeps the half-ton straight. We correct the angles the taller front moves and check the pieces a full-size truck leans on hardest.
- Front strut spacers machined for the F-150 strut tower
- Optional replacement front struts sized to the added height
- Camber and caster brought back into the factory window
- Thrust-angle reset on the rear axle
- Bump-stop gap and brake-hose clearance verified
- A road test for pull, rub and steering-wheel centering
How we level a Ford F-150
The F-150 is a quick job, but we run the same checklist every time so the outcome does not depend on the day.
-
1. Confirm the F-150 year, engine and whether it is an FX4 or Tremor.
-
2. Set the truck on the rack and record the four-corner ride height.
-
3. Install the front spacers and torque the strut fasteners to F-150 spec.
-
4. Dial camber and caster back toward the middle of the range.
-
5. Reset toe and thrust angle with the truck at its new ride height.
-
6. Inspect control-arm, brake-hose and bump-stop clearance.
-
7. Take it out on the loop and center the wheel before handoff.
What a Ford F-150 leveling kit costs
A leveling kit is the least expensive way to change how an F-150 sits, and the total moves with the spacer design and whether you swap the front struts. Because pricing differs by year and trim, read these figures as ranges and ask us for your truck's number. The total varies by year and trim.
- Basic front spacer kit for the F-150
- $280–$580 installed
- Spacer kit plus new front struts
- $600–$1,100
- Coil-over leveling setup for the F-150
- $1,000–$1,800
- Alignment folded into the same visit
- $95–$190
- Rear block so a loaded F-150 stays level
- $250–$600
Why F-150 owners level
The F-150 is the Valley's default work truck, hauling tools, towing a trailer and doubling as the family vehicle. Leveling it frees room for a 33 up front, takes the rake out so the truck reads finished, and leaves the rear leaf pack to carry the load it was specified for. Nothing on the door sticker changes.
- A front tire up to 33 inches on the stock wheel
- Payload and towing ratings untouched
- A simple, reversible change for a daily half-ton
From the bay
Questions about this build
How much does it cost to level an F-150?
A basic front spacer kit on an F-150 runs about $280 to $580 installed with the alignment. Adding new front struts or a coil-over setup raises that, so send us the truck and we price the exact build.
Will leveling an F-150 affect the ride?
A spacer kit on factory struts keeps the ride close to stock because the springs are untouched. Fresh front struts often improve it, since most F-150s at 80,000 miles have soft originals by then.
What tire clears an F-150 leveling kit?
A two-inch level usually clears a 33 on an F-150 with the stock offset, and sometimes a 285/70. We check wheel offset and fender clearance at full lock on your truck so the tire you want actually fits.
Does leveling an F-150 hurt towing?
No, and that is the point of a front-only kit. The rear leaf springs and axle are untouched, so the F-150 keeps its rated payload and tongue weight. For a truck that tows heavy, we add a rear block so it still sits level loaded.
Can you level a two-wheel-drive F-150?
Yes, and two-wheel-drive F-150s level cleanly for stance and front tire room. The struts differ from the four-wheel-drive truck, so we order by drivetrain and confirm the springs before the kit is ordered.
Is an alignment needed after leveling an F-150?
Always. Lifting the front shifts camber and toe and leaves the wheel off-center until it is reset. We align to the new height in the same visit so the F-150 tracks straight and the front tires wear evenly.
Why Valley drivers bring their trucks here
- Lift, leveling, wheels and alignment under one roof, corrected and aligned.
- Written estimate before any part is ordered, with the extras called out.
- Fitment confirmed on your exact truck before you buy tires or wheels.
- Road-tested and re-torqued, with a settling check after the first miles.
Request a quote
Tell us your truck and what you want. We reply with a written quote for the build.