Ford Bronco Sport Lift Kit
A suspension lift for the unibody Ford Bronco Sport that adds clearance for gravel and light trail, sized for a car-based compact SUV rather than the body-on-frame Bronco.
Ford Bronco Sport Lift Kit at a glance
- Two-inch Bronco Sport lift with struts and spacers
- $1,000–$1,800
- Two-and-a-half-inch Bronco Sport lift with rear spacers
- $1,550–$2,600
- Taller strut package for the Bronco Sport
- $1,800–$3,000
- Four-wheel alignment after the lift
- $90–$180
Ford Bronco Sport lift kit for the SUV that shares a name
You can raise a Bronco Sport, but not the way you raise the full Bronco, because the Sport is built on a crossover shell: a strut at each front corner and an independent rear, with nothing in the way of a frame or a low range. The extra height comes from longer front struts and a spacer at the rear, and the real task is holding the crossover geometry inside its design window. That is enough for gravel and forest tracks, and honestly no more.
- Two to three inches without over-stressing the unibody
- Front strut-and-spacer package, rear spacer to match
- Clearance for gravel and light trail, not rock crawling
Ford Bronco Sport lift kit fitment
Bronco Sport running gear is consistent across trims, but the Badlands starts taller and the two engines differ in front weight. We confirm the year, engine and trim so the lift matches the SUV rather than a catalog figure.
- Bronco Sport from 2021 onward
- Lift of 2 to 2.5 inches on the unibody platform
- 1.5 and 2.0 EcoBoost powertrains
- Base through Heritage trims, including Badlands
What the Ford Bronco Sport lift kit includes
A Bronco Sport lift stays deliberately short: a couple of parts, not a tall kit the crossover was never meant to carry. Everything we add keeps the springs and the alignment inside the Sport's design window.
- Front strut spacers or longer front struts for the Sport
- Rear spring spacers for the independent rear
- Shocks matched to the taller, light-duty stance
- Camber and caster correction within the strut's range
- Subframe, brake-line and harness clearance checks
- Four-wheel alignment and a road test to close the job
How we lift a Ford Bronco Sport
A Sport lift runs in a short, set sequence, because a crossover front end does not reward guessing.
-
1. Confirm the Bronco Sport year, engine and trim.
-
2. Check the ride height and inspect the front struts and rear springs.
-
3. Install the front struts and spacers.
-
4. Fit the rear spring spacers and matched shocks.
-
5. Correct camber and caster within the strut range.
-
6. Align all four corners and set thrust angle.
-
7. Road-test for rub, wander and a centered wheel.
What a Ford Bronco Sport lift kit costs
The Sport takes less equipment than a frame truck, so a lift lands lower on the bill, though it still tracks the height you choose. The figure moves with the model year and powertrain, so take the ranges below as a guide and ask us to price yours. The total varies by year and trim.
- Two-inch Bronco Sport lift with struts and spacers
- $1,000–$1,800 installed
- Two-and-a-half-inch Bronco Sport lift with rear spacers
- $1,550–$2,600
- Taller strut package for the Bronco Sport
- $1,800–$3,000
- Four-wheel alignment after the lift
- $90–$180
- Rear spacer kit for the independent rear
- $340–$720
What a lifted Bronco Sport can and cannot do
Raised sensibly, a Bronco Sport becomes a more useful gravel and campsite companion, and nothing more than that. It wins ground clearance and a taller tire, but it keeps the crossover's honest ceiling: no low range, a light subframe and a payload number a heavy kit would only damage. We keep the Sport fun on loose ground rather than pretending it is the full Bronco.
- Real clearance for gravel and forest roads
- Unibody limits respected, not fought
- The compact SUV's easy, frugal manners kept
From the bay
Questions about this build
Can you lift a unibody Bronco Sport?
Yes, within limits. A Bronco Sport lift uses longer front struts and a rear spacer rather than a frame lift, and we keep the height and parts inside what the car-based platform is designed for. It is clearance for loose surfaces, not rock duty.
How much lift is safe on a Bronco Sport?
Two to two and a half inches is the honest range. Past that the strut geometry and the car-derived subframe are asked to do something they were not designed for, and the SUV stops feeling like a Bronco Sport.
Does lifting a Bronco Sport hurt its mileage?
The lift adds a little drag, but the bigger hit comes from a taller, heavier tire. A sensible all-terrain on a modest Bronco Sport lift keeps the friendly mileage that made the SUV appealing in the first place.
Will a lifted Bronco Sport still handle well?
Yes, when the kit is sized to the SUV. We keep the springs and alignment within the Sport's design range so it stays predictable on pavement, which matters more on a car-based platform than on a truck.
Can you lift a Badlands Bronco Sport?
Yes, though a Badlands already rides taller, so the net gain is smaller and the kit is chosen to suit its starting height. We measure your SUV first and tell you how much lift it actually needs.
What tire fits a lifted Bronco Sport?
A two-to-two-and-a-half-inch lift usually fits a 245 or a 235/70 on the Bronco Sport's stock wheel. We check wheel-liner and fender clearance at full lock on your SUV before the tires are ordered.
Why Valley drivers bring their trucks here
- Lift, leveling, wheels and alignment under one roof, corrected and aligned.
- Written estimate before any part is ordered, with the extras called out.
- Fitment confirmed on your exact truck before you buy tires or wheels.
- Road-tested and re-torqued, with a settling check after the first miles.
Request a quote
Tell us your truck and what you want. We reply with a written quote for the build.