Chevy Colorado Lift Kit
A suspension lift kit for the Chevy Colorado that adds real clearance for larger tires, with the steering and geometry correction a lifted mid-size truck needs to drive straight.
Chevy Colorado Lift Kit at a glance
- 2-inch Colorado spacer lift
- $900–$1,800
- 2.5–3-inch Colorado suspension lift
- $1,400–$2,600
- 3.5-inch Colorado kit with control arms
- $2,200–$3,600
- Four-wheel alignment after the Colorado lift
- $90–$180
Chevy Colorado lift kit with the corners sorted out
Lifting a Colorado is about more than stacking spacers on the coil-over. A proper lift raises the front and rear together, keeps the independent front suspension in its working range and corrects the steering so the mid-size truck still tracks true at highway speed. Whether you want two inches for a taller all-terrain or close to four for serious trail duty, the kit has to fit the Colorado suspension, not a generic template.
- Front and rear lift matched so the Colorado sits level
- Steering and control-arm correction for the mid-size
- Installed, aligned and road-tested before pickup
Chevy Colorado lift kit fitment
The Colorado suspension changed between the 2015 generation and the newer body, so lift parts do not swap between them. We confirm the year, trim and drivetrain, then match the kit height to the tires rather than guessing from a catalog.
- Second-generation Chevy Colorado, 2015 through 2022
- Newer Chevy Colorado from 2023 onward
- Lift height of 2 to 3.5 inches
- Rear leaf-spring trucks, two- and four-wheel drive
What the Chevy Colorado lift kit includes
Every Colorado kit is built around the exact truck, so the parts list changes with trim and height while the goal stays the same: raise the truck, keep the angles in range, protect the parts the lift stresses.
- Front strut spacers or replacement coil-overs
- Rear lift blocks or an add-a-leaf
- Longer rear shocks tuned to the Colorado travel
- Upper control arms or ball-joint spacers
- Brake-line, driveshaft and bump-stop attention
- Grade 8 hardware and a full torque sequence
How we install a Chevy Colorado lift kit
We follow the same sequence on every Colorado so nothing is skipped and nothing is left to chance.
-
1. Confirm the Chevy Colorado year, trim and target lift height.
-
2. Record the ride height and inspect the Colorado ball joints and brakes.
-
3. Install the front lift and correct camber.
-
4. Install the rear lift and set the Colorado to a level stance.
-
5. Fit longer shocks and check brake lines.
-
6. Set thrust angle and align the front.
-
7. Road-test the Colorado for wander and rubbing, then torque everything.
What a Chevy Colorado lift kit costs
A Colorado lift bill is the kit plus labor plus the alignment that follows, and it climbs with height and complexity. A two-inch spacer lift stays modest, and a full suspension kit costs several times more. Kit prices vary by year and trim, so treat every figure as a range.
- 2-inch Colorado spacer lift
- $900–$1,800 installed
- 2.5–3-inch Colorado suspension lift
- $1,400–$2,600
- 3.5-inch Colorado kit with control arms
- $2,200–$3,600
- Four-wheel alignment after the Colorado lift
- $90–$180
- Rear add-a-leaf or leaf upgrade
- $400–$900
What a lifted Chevy Colorado changes underneath
Once the Colorado goes up three inches or more, the stock control arms and ball joints start running out of range, and driveshaft angles change on the rear. That is why a serious Colorado kit includes corrected upper control arms and sometimes a carrier-bearing drop. Owners who skip those parts get a truck that aligns poorly and vibrates under load, which is exactly what the correct kit avoids.
- Upper control arms and a healthy ball-joint angle
- Rear driveshaft geometry kept from vibrating under load
- A Colorado that aligns to spec instead of fighting the rack
From the bay
Questions about this build
How much lift can a Chevy Colorado take safely?
Two to three inches is the sweet spot on most Colorados, because the independent front suspension still aligns and the driveshaft angle stays healthy. Corrected arms matter past three inches, and driveshaft attention too, and we build both into the quote.
Will a Chevy Colorado lift kit affect fuel economy?
The lift itself costs a little from the extra frontal area, but the bigger hit to the Colorado comes from heavy, aggressive tires. A modest lift with a sensible all-terrain keeps the Colorado efficient.
Do I need new upper control arms on a lifted Colorado?
Above about three inches, yes. The stock Colorado arms run out of ball-joint range and cannot hold camber, so corrected arms are the only way to align it. Below that, stock arms are usually fine.
Can you lift a two-wheel-drive Chevy Colorado?
Yes, and two-wheel-drive Colorados lift cleanly for stance and front tire clearance. The parts differ from the 4x4 kit, so we order by the drivetrain and confirm the front springs first.
What tire size works with a 3-inch Colorado lift?
A three-inch lift usually clears a 33 on the Colorado with the right offset, and sometimes a 34 with trimming. We check the wheel offset and fender clearance on your truck first.
How does a lifted Colorado handle on the highway?
A Colorado lifted correctly handles close to stock, because we keep the steering geometry in range and align to the new height. A truck lifted too high without correction wanders and drones, and that is the version we avoid.
Why Valley drivers bring their trucks here
- Lift, leveling, wheels and alignment under one roof, corrected and aligned.
- Written estimate before any part is ordered, with the extras called out.
- Fitment confirmed on your exact truck before you buy tires or wheels.
- Road-tested and re-torqued, with a settling check after the first miles.
Request a quote
Tell us your truck and what you want. We reply with a written quote for the build.